Marathon XLA + GES 2.0
(Picture shown is Marathon XLUA + GES 2.0)
THE MARATHONģ XLA and XLUA + GES 2.0 are the high speed Glue Extrusion System (GES) equipped models in the Marathon series of labelers. Marathon roll-fed labelers feature SMARTdriveģ, the industry's first, all-electronic drive train. Based on a five-axis servomotor platform supported by four variable frequency drives, SMARTdrive replaces the mechanical complexity of other labelers with a dependable, high performance electronic motion control system. The payoff is easier set-up, simpler operation, faster changeovers, increased uptime, and decreased maintenance.
- Principles of Operation
- More Information
SPEED FOR FULL & EMPTY APPLICATIONS
Marathon XLA + GES 2.0 and XLUA + GES 2.0 labelers feature the linear roll-fed labeling concept invented by B & H to apply wrap-around labels to full or empty cylindrical containers at speeds up to 650cpm. Container handling is performed by a feedscrew and pocketed starwheel system that accommodates both flattop and air conveyor systems.
HIGH PRODUCTIVITY, LOW TOTAL COST OF OWNERSHIP
Accurate labeling at high speeds requires precise, consistent synchronization of key labeler components. Marathonís SMARTdrive, a PLC controlled motion control system using independent multi-axis servos communicating via a high-speed bus, delivers exceptional and dependable synchronization. Other labelers that achieve synchronization through mechanically linked and timed components such as sprockets, chains and belts lose their timing as they wear and stretch. Marathonís all electronic drive train maintains precise synchronization over the life of the labeler and this translates into faster set-up and easier operation.
Marathonís SMARTdrive platform also uses significantly fewer mechanical parts and components than other labelers, which reduces maintenance costs and increases uptime. No other roll-fed labeler can match Marathonís low total cost of ownership.
FAST, 15 MINUTE CHANGEOVERS
Measured from last bottle in to first bottle out, Marathon labelers are easy to changeover from one container to another in 15 minutes or less.
How is this possible?
First, all change parts with one exception are tool less which makes removing one set of change parts and installing the next set of change parts fast and easy.
Second, labeler set-up parameters for each container and label combination are stored as recipes in the PLC, and a recipe is selected and downloaded as part of the changeover process. When selected, the PLC accesses the recipe and then automatically sets all key components to their zero positions so labeling can begin. This eliminates the need for tedious and time consuming labeler adjustments and retiming as part of the changeover process.
GLUE EXTRUSION SYSTEM 2.0
The B & H GES 2.0 is a patented fully automatic, recipe driven, slit die hot melt applicator for roll-fed labeling. It isnít a glue wheel system. It isnít a spray glue system. It is new, different, and it is changing the way hot melt adhesives are applied to labels.
The GES 2.0 precisely meters and controls glue flow and glue application. GES glue patterns are void free and the system offers precise, consistent control over the amount of adhesive applied to a label, the placement of the adhesive on a label, and the size of the leading and trailing edge glue patterns.
- Steady-state production speeds up to 650 containers per minute
- 15 minute size changeovers, from last bottle in to first bottle out
- XLA model features straight-through configuration
- XLUA model features "U" configuration
- Allen-Bradley controls and drive train standard
- Glue Extrusion System 2.0 standard
- Intelligent Registration Control System standard
- High performance Invation Cutters available in 2, 3, & 4 station configurations
- Lower spare parts consumption and lower maintenance requirements versus mechanical or rotary labelers
- Higher operating efficiencies and productivity versus mechanical or rotary labelers
- B & H's Total Financial Impact (TFI) model and analysis process can calculate and compare the total financial impact of Marathon versus any competitive technology
Principles of Operation
( Click to enlarge )
Marathon XLA + GES 2.0 Footprint
CONVEYOR: straight-through or U-conveyor configurations, stainless steel, left hand feed
TABLETOP & LOWER GUARDING: stainless steel
UPPER GUARDING: swing out, polycarbonate doors with safety interlocks standard
MAIN DRIVE SYSTEM: SMARTdriveģ, all electronic drive train with five servo axes and four variable frequency drives
HOT-MELT APPLICATION: Glue Extrusion System 2.0
HOT-MELT SYSTEM: ITW Dynatec
VACUUM SYSTEM: multi-valve system with independent controls
ELECTRONIC ENCLOSURE: single mild steel electrical cabinet; built-in air conditioner
OPERATOR CONTROL STATION: Allen-Bradley color HMI touchscreen
CHANGE PARTS: color-coded, Rapid Changeover (RCO) change parts standard
Container Handling Features
CONTAINER INFEED: feedscrew with pocketed starwheel system
AUTOMATIC LINE SPEED CONTROLS: automatic adjustment of machine speed based on container supply at infeed and discharge
MISSING CONTAINER DETECTION & ALARMS: stops labelers when missing container is detected at high speed
ROLL-ON PAD: fine adjustments for pitch control
Label Handling Features
REGISTRATION CONTROL: Marathon Intelligent Registration Control System standard
LABEL ROLL STANDS: dual label roll stands with automatic tensioning system standard
LOW REEL ALARM: detects low reel status and automatic alarm notifies operator; label countdown capability allows operator to minimize butt-roll label scrap
BROKEN WEB SAFETY & ALARM: detects broken web condition and automatically shuts down machine
VACUUM DRUM SAFETY & ALARM: detects missing label on vacuum drum and automatically shuts down machine
2, 3, & 4 STATION INVATIONģ CUTTERS
10" INVATION CUTTERS
KINETI-COATô CUTTER SHELLS
2ND BACK SIDE HMI
US EYEMARK SCANNER
BACK EYEMARK SCANNER
REMOTE ACCESS MODULE
ETHERNET COMMUNICATIONS MODULE
CUSTOM ELEVATION SUBFRAMES
CONTACT B & H FOR A COMPLETE LIST OF AVAILABLE OPTIONS
Speed Range*: 50 - 650 CPM (containers per minute) depending on container size and cutter configuration
Container Diameter Range:
Label Panel Diameter Range:
Marathon XLA/XLUA: 1.88 - 5.02 in
(47.8 - 127.5 mm)
Marathon XLA+: 1.88 - 6.25 in
(47.8 - 158.8 mm)
Label Size Range:
Length (for complete wrap):
Marathon XLA/XLUA: 6.28 - 16.24 in
(159.5 - 412.5 mm)
Marathon XLA+: 6.28 - 20.00 in
(159.5 - 508.0 mm)
Marathon XLA/XLA+/XLUA: 1.0 - 9.5 in
(25.4 - 241 mm)
Plastic, glass, metal, fiberboard
Paper, PP, BOPP, PVC, PE, and PS, in single and
Ambient Operating Conditions:
Temperature: 50o- 120o F (10o- 49o C)
Relative Humidity: 10 - 90%, non-condensing
Controls and Drive Train:
Main voltage: 380 - 480 VAC; 3 phase;
40 amps max
80 PSI via 0.5 NPT;
Consumption approximately 2 CFM
Straight-through or U-conveyor configurations
Adjustable 36.5 to 39.0 in (927 mm - 991 mm)
+ Specifications subject to change without notice.
* Labeling speed is dictated by cutter configuration, container type, container shape and line conditions.